RAM One Engine Installation Cessna 421C SN 0001-0910

Cessna 421C ( SN 0001 - 0910 )
One Engine Installation at RAM

One OHE CMI GTSIO-520-L [ Specify Side ]

Horsepower - 375 hp
TBO - 1600 hrs.
Cylinders - NE
[ RAM Nickel New Cylinder Package ]
Crankcase - heavy style case - OHE
[ with 7th studs on cylinder bases ]
Crankshaft - OHE
Camshaft - NE
Propeller shaft, quill shaft,
and reduction gear - OHE
Alternator - exchange
Starter and starter drive - OHE
CMI/Bendix Magnetos - OHE
Spark plugs - new
Magneto harness - Champion - new
Fuel injection system - OHE
Turbocharger - OHE
Turbo controller - OHE
Overboost relief valve - OHE

Intercooler - exchange
[ inspected and repaired ]
Induction couplings - new
Air filter - new
Metal baffles - exchange
[ refurbished and painted ]
Baffle Seals - new
[ RAM SureStand red silicone rubber ]
Cooling shroud - RAM - new
[ for dry vacuum pump ]
Oil cooler - NE
Precision balance - exchange
[ crankshaft and rod sets ]
Core Return Policy - See:
RAM OHE CMI GTSIO-520
Engine Overhaul Specifications.
Also see:
Value Options & Compliance Items.

OHE = Overhauled Exchange
NE = New Exchange - OEM or PMA
New = New Outright - OEM or PMA
New Items = Subject to test time,
ferry time and inventory time.

Installation Parts - Included

Propeller - reuse customer's
[ flush and reuse serviceable propeller ]
Governor - reuse customer's
[ flush and reuse serviceable governor ]
Wastegate and actuator assembly - RAM - OHE
Induction ducts - new
[ turbo outlet and inlet ]
Engine shock mounts - one set of four - new
Exhaust slip joint - one each - new
Engine 3-in1 gauge - check calibration
[ for engine being installed ]
EGT probe - new
Primary fuel, oil and hydraulic hose kit - new
[ Heavy duty Teflon™ hoses - w / Integral firesleeve ]

RAM Overhauled Engine TBO Warranty

100% Engine and accessories for the 1st year, or 500-hrs, whichever occurs first. Thereafter, the engine only is warranted on a prorata basis to TBO at RAM’s reduced minimum accrual rate of only 30 hours per month, thus extending coverage over four years. For complete details go to www.ramaircraft.com/ramtbowarranty

Installation and Set-up

Each aircraft receives a detailed preflight and high altitude flight inspection
to ensure airworthiness and to document performance of instruments, flight
controls, landing gear, accessories, lights, and avionics.
Discrepancies are brought to customer’s attention. Unairworthy items must
be repaired at customer’s expense during RAM proceedings in order for RAM
to set up, fly, and deliver the finished product.
Old engine is removed. Engine bed is cleaned. Mount structure is inspected
and corrosion treated. Four hours labor is standard.
Due to its tendency to contaminate the engine oil supply, if installed, the
propeller unfeathering accumulator will be disabled unless optionally
replaced with a newer unit. OHE: $875
Applicable one engine installation parts are installed.
Engine is installed and setup, which includes multiple flights.
Fuel for flying both engines is included; however, adjustments or maintenance
to the remaining engine, or to the aircraft, are not included in this package price.
Aircraft washed. Interior cleaned prior to delivery and customer acceptance.
Remove, clean, and reinstall the air/oil separator on all 421C and late model 421B (after serial number 500).

One Engine
Installation at RAM: $62,662
Exchange basis

RAM OHE CMI GTSIO-520-L engine
Installation Parts - Included
Installation and Set-up
Reuse Customer's propeller and governor
[ Propeller and governor must be airworthy. ]

Click here to view and print a
PDF document of this page.

Click here to download
FREE Adobe Acrobat Reader.